Growth-Rate-Dependent Mechanical Properties and Microhardness of a Pb–Sn–Cd Ternary Eutectic Composite
Author :
Associate Professor Rajesh KantJourna Name:
International Journal of Science, Engineering and Technology Volume:
12 issue:3 Year:Volume-12-issue-3 Views : 64
Abstract:
The present work examines the relationship between anisotropic growth velocity and the mechanical behaviour of the Pb–Sn–Cd eutectic composite. The alloy was prepared from the constituent metals using the heat-chill method and its eutectic melting point was determined by differential scanning calorimetry. The composition investigated was Sn 51.2 wt%, Pb 30.6 wt%, Cd 18.2 wt%, with a measured eutectic melting point of 418.2 K. Macrohardness-related strength modes and Vickers microhardness were evaluated as functions of growth velocity, indentation time and applied load. At approximately 3.1 × 10?? m s?¹, the modulus of rupture is 50.70 × 10? N m?², tensile strength is 61.80 × 10? N m?² and compressive strength is 64.20 × 10? N m?². Microhardness rises from 17.60 kg mm?² at 0.50 × 10?? m s?¹ to a maximum of 37.60 kg mm?² at 3.10 × 10?? m s?¹ and then decreases to 17.80 kg mm?² at 7.50 × 10?? m s?¹. At a 20 g load, microhardness remains nearly constant with indentation time, ranging approximately from 36.10 to 36.70 kg mm?² over 20–150 s. With indentation load, Hv decreases from 39.50 kg mm?² at 10 g to 18.10 kg mm?² at 100 g. The results demonstrate a characteristic optimum or moderate-growth region in which the fibrous eutectic microstructure and mechanical response are maximized. The observations support the interpretation that directional/fibrillar growth produces stronger, more coherent microstructures than instantaneous or very rapid growth.
APA:Associate Professor Rajesh Kant. (Volume-12, Issue-3 -(Year-Volume-12-issue-3)). Growth-Rate-Dependent Mechanical Properties and Microhardness of a Pb–Sn–Cd Ternary Eutectic Composite. Retrieved from https://www.ijset.in/wp-content/uploads/IJSET_V12_issue3_640.pdf
Chicago:Associate Professor Rajesh Kant. "Growth-Rate-Dependent Mechanical Properties and Microhardness of a Pb–Sn–Cd Ternary Eutectic Composite" Example, Volume-12-issue-3-Year-Volume-12-issue-3-2348-4098. https://www.ijset.in/wp-content/uploads/IJSET_V12_issue3_640.pdf.