Design and Fabrication of On-Chip Low Power Microstrip Filter for Enhanced Wireless Communication
Author :
M.Tech Scholar Ms. Madhu Vishwakarma, Assistant professor Ms. Deepali SahuJourna Name:
International Journal of Science, Engineering and Technology Country :
IndiaVolume:
12 issue:2 Year:2024 Views : 265
Abstract:
Abstract: A time-domain technique is proposed for the design of ultra wide band (UWB) micro strip filters. The design method utilizes the reflectance coefficient S11 specified in the frequency domain. Given the frequency response of a UWB filter, its time-domain response is estimated using a series of UWB pulses. These UWB pulses, Gaussian in nature with identical bandwidths but varying delays, are employed to ascertain the filter coefficient’s value as a function of the number of pulses. The technique leverages a time-domain reflection scenario with very narrow Gaussian pulses to obtain the impulse response of the system for pulse duplication, considering pulse amplitude and delay. The desired low-pass filter performance is evidenced by the sharp S11 roll-off, commencing around 5GHz, with some deviation observed near the higher end of the frequency range. In the S11 results, the stop band for the calculated curve is slightly narrower than the measured results.
APA:M.Tech Scholar Ms. Madhu Vishwakarma, Assistant professor Ms. Deepali Sahu. (Volume-12, Issue-2 -(Year-2024)). Design and Fabrication of On-Chip Low Power Microstrip Filter for Enhanced Wireless Communication. Retrieved from https://www.ijset.in/wp-content/uploads/IJSET_V12_issue2_634.pdf
Chicago:M.Tech Scholar Ms. Madhu Vishwakarma, Assistant professor Ms. Deepali Sahu. "Design and Fabrication of On-Chip Low Power Microstrip Filter for Enhanced Wireless Communication" Example, Volume-12-issue-2-Year-2024-2348-4098. https://www.ijset.in/wp-content/uploads/IJSET_V12_issue2_634.pdf.