Strength Studies on Concrete by Partial Replacement of Fine Aggregate With M-Sand Cement With Graphene Oxide- Using M20 grade of concrete

Prof. Dr. K. Chandramouli; Asst. Prof. J. Sree Naga Chaitanya; Asst. Prof. K.Divya; B.Tech. Student M Hepsibha

Strength Studies on Concrete by Partial Replacement of Fine Aggregate With M-Sand Cement With Graphene Oxide- Using M20 grade of concrete

Author : Prof. Dr. K. Chandramouli, Asst. Prof. J. Sree Naga Chaitanya, Asst. Prof. K.Divya, B.Tech. Student M Hepsibha Journa Name: INTERNATIONAL JOURNAL OF SCIENTIFIC RESEARCH AND ENGINEERING TRENDS Country : India Volume: 9 issue: 6 Year: 2023 Views : 492

Abstract:

To form concrete, a composite material, aggregate is bound together with a fluid cement that cures over time. the qualities of freshly mixed concrete that hardens when M-Sand is used as the fine aggregate. Graphene oxide (GO) is graphene that has undergone oxidation. Because graphene oxide dissolves in water and other solvents, processing it is simple. This study aims to investigate the use of graphene oxide in place of some cement and M-Sand in place of some fine aggregate. 28 and 7 days were tested during the cure period. However, when we included graphene oxide in the cement mixture, the compressive strength rose. A proportion of M-Sand 10% ,20%,30% and 40% is used in place of the fineaggregate and cement is replaced with an 0.03%, 0.06%, 0.09%, 0.12%, and 0.15% by graphene oxide. Compressive and split tensile strengths have been determined in this experiment.