Parametric Optimization Of Abrasive Water Jet Machining (AWJM) Process For Non-Conventional Rubber-Based Materials
Author :
Sunil A Kumavat, Amol P ChaudhariJourna Name:
International Journal of Science, Engineering and Technology Volume:
14 issue:3 Year:Volume-14-issue-3 Views : 150
Abstract:
This work presents an experimental investigation on the optimization of Abrasive Water Jet Machining (AWJM) parameters for rubber-based composite materials, which exhibit complex viscoelastic behaviour. Conventional machining methods often lead to deformation and thermal damage in such materials, making AWJM a suitable alternative due to its cold cutting nature. A Taguchi L27 orthogonal array was employed to systematically evaluate the influence of water pressure, traverse speed, and stand-off distance on surface roughness. A regression-based predictive model was developed to quantify parameter interactions. The statistical analysis confirmed that water pressure has the highest influence on surface quality, followed by traverse speed and stand-off distance. The optimal surface roughness of 2.857 µm was achieved at higher pressure levels combined with moderate-to-high traverse speed and increased stand-off distance. The results establish a parameter selection framework for efficient machining of deformable rubber materials and provide a basis for future integration of advanced predictive models
APA:Sunil A Kumavat, Amol P Chaudhari. (Volume-14, Issue-3 -(Year-Volume-14-issue-3)). Parametric Optimization Of Abrasive Water Jet Machining (AWJM) Process For Non-Conventional Rubber-Based Materials. Retrieved from https://www.ijset.in/wp-content/uploads/IJSET_V14_issue3_476.pdf
Chicago:Sunil A Kumavat, Amol P Chaudhari. "Parametric Optimization Of Abrasive Water Jet Machining (AWJM) Process For Non-Conventional Rubber-Based Materials" Example, Volume-14-issue-3-Year-Volume-14-issue-3-2348-4098. https://www.ijset.in/wp-content/uploads/IJSET_V14_issue3_476.pdf.