×

A Review on Pushover Analysis of Framed Structure Building Using ETABS Software

Author : Scholar bhoopendra Singh, Associate Professor R.K. Grover Journa Name: International Journal of Science, Engineering and Technology Country : India Volume: 12 issue: 2 Year: 2024 Views : 542
Abstract:
Abstract: Non-linear analysis is necessary to evaluate the seismic demand of the proposed or existing structure, as linear analysis is inadequate in assessing the seismic demand under severe earthquakes. In this article non- linear static analysis (pushover analysis)has been done to understand the behavior 8 multistoried residential building located in different seismic zones of India having similar geometrical properties using ETABS2019. The behavior of multistoried building has been investigated in terms of force- displacement relationships, inelastic behavior of structure and sequential hinge formations etc. Plastic hinge formation gives real behavior of the structure. From the analysis results, it was observed that, when of structure. Results indicate that, the damage in a building is limited and columns at the lower stories can be retrofitted based on the importance of the structure. If the zone increasing, base shear, story displacement, story drift, story shear, monitored displacement and auto lateral loads has been increased gradually, indicating the severity of seismic activity. In this analysis, firstly hinges were formed in beams and then in columns at ground floor of structure because of column member of the structure are critical in seimic design. The hinge formation propagates from ground floor to middle floor columns and then finally to the upper floor columns. The propagation of hinges from lower stories to upper stories leads to collapse.

Related Indexing Platform

Indexed

Leave Your Comment

Related Reviewers

Chat with Expert